Wellington’s generator conversation is different from Fort Collins’s or Windsor’s, because the town’s fuel comes from somewhere else. Natural gas here is supplied by Black Hills Energy rather than Xcel, electricity is either Poudre Valley REA or Xcel depending on the address, and the Town runs generator and gas-line work through its own permit category with a required gas-line drawing. Precision Service Electric installs Generac standby systems in Wellington and handles that sequence as one job. Call 970-593-3190.

Why Wellington Homes Lose Power
Wellington sits on the open plains north of Fort Collins, close to the Wyoming line, and overhead distribution across that ground takes the wind first. When high-wind events come through the region, restoration is slower than usual because crews have to wait for conditions that let them work safely — a pattern the regional news coverage has described during past storms, and one that explains why outages here can run hours rather than minutes.
The second reason people call is narrower: a well pump, a medical device, a home office, or animals in an outbuilding that cannot go dark during a scheduled repair. Those are sizing conversations, not sales conversations.
Standby vs Portable: Which Fits a Wellington Home
A standby generator is permanent. It sits on a pad outside, runs on the property’s gas or on a propane tank, and starts within seconds of a utility failure. An automatic transfer switch disconnects the house from the grid and connects the generator; when power returns it transfers back, runs a cool-down and shuts off.
A portable generally needs a person to start and connect it and someone to manage its fuel. It can supply selected circuits through a properly installed inlet and a listed transfer device — which is a very different thing from a cord run through a window, and a different thing again from a suicide cord back-feeding a panel, which is dangerous and a code violation.
Generac Systems We Install
Precision Service Electric is factory-trained and an authorized Generac dealer — for Generac equipment — and we service all generator brands. An installation contains the outdoor unit on an approved base, the automatic transfer switch beside the main service panel, the fuel connection, the electrical interconnection, and start-up commissioning with a simulated outage test.
Sizing starts from the calculated load and the household’s priorities rather than a kW number picked from a chart. Whole-home with load management and essential-circuits backup are both legitimate answers, and the decision is made before the unit is ordered.
Natural Gas or Propane in Wellington
Wellington’s natural gas comes from Black Hills Energy, not Xcel — a detail that matters because every “Denver metro” generator page assumes otherwise. If your address is on the gas main, a gas unit means no tank, no deliveries and no refill to remember. The catch is capacity: a standby unit draws a substantial volume at load, and the existing service was sized for a furnace, a range and a water heater. The utility may need to evaluate whether the meter and service can carry the addition, and that review is theirs rather than ours.
Propane is the answer when the gas run is long, when the service cannot be increased, or when the address sits beyond the main. The tank itself, its placement and its delivery schedule belong to a propane supplier, not to the electrician — we connect the unit to whatever fuel arrangement the property ends up with.
Permits in Wellington
Generator and gas-line work sits in the Town’s permit category, and the Town publishes the shape of the submission rather than leaving it to inference: a SAFEbuilt gas-line inspection form plus a gas line or one-line example drawing, with residential alteration and accessory-structure categories potentially applying when the pad or placement changes the site. The Town confirms whether anything further is needed.
Applications run through the Town of Wellington Building Department at 8225 Third Street, 970-821-5078, using the Community Core application system. Plan review, permitting and inspection are handled by SAFEbuilt’s Windsor branch, whose inspection line is 970-674-1036. A Town contractor licence is required for the work.
Wellington adopted the 2024 I-Codes effective 1 January 2026 and states alignment with the current National Electrical Code. We confirm the operative edition at permit time rather than printing a code year on a quote.

Our Process, Step by Step
Site assessment and placement — where the unit sits relative to windows, doors, the gas meter and the property line — then the sizing and load conversation, then a written scope. After that: the permit and the gas coordination, the pad and placement, the transfer switch and electrical connection, the inspection, and a simulated outage test with the household watching.
Wellington’s permit process runs through the Town’s Community Core system, with SAFEbuilt handling plan review, permits and inspections on the Town’s behalf, so the schedule is driven by that handoff as much as by our calendar. We give the expected window and update it when the review moves.
Maintenance and Repair After the Install
Most of the year the unit does nothing at all, which is precisely the problem: an engine that has not run since spring is being asked to carry a house in January. Annual service — the exercise cycle, oil and filter, battery, and a load test — is the difference between a machine that starts and one that merely ought to.
We also repair generators we did not install, including other brands. In a town this size that matters: several out-of-area companies sell a unit and then service it from an hour away.
Cost in Wellington
Generac’s own published guidance puts a whole-home standby installation in the range of $8,000 to $16,000, inclusive of the generator, the system equipment and the installation. No Wellington-specific figure is published, and a quote that claims one is describing a particular property rather than the market.
What moves the number: generator size, transfer-switch type, fuel type, pad and site preparation, the distance from the gas meter, the condition of the electrical service, and permit costs.
Service Area: Wellington and Northern Colorado
We work Wellington and the communities around it — Fort Collins, Timnath, Windsor, Severance, Ault and the rest of the corridor north of the city. The permitting authority and the utility change from town to town, which is why the local details on this page are Wellington’s rather than shared across the region.
Request a Generator Quote in Wellington
A photo of the electrical panel, the meter, and the wall where the unit would sit is enough to start a useful conversation. Precision Service Electric is family owned, in business 30 years, licensed and insured under Colorado license #3918, factory-trained and an authorized Generac dealer, and rated 4.8 stars across 47 Google reviews. Call 970-593-3190 or request a quote.
Related Work in Wellington
The transfer switch and the panels it serves have to be matched to the loads actually being backed up, and panel capacity decides part of that — our panel replacement page covers the arithmetic, and the Generac systems and service overview covers equipment and maintenance. For the same work in other towns, read generator installation in Fort Collins or Loveland, or browse the service area.


“Awesome experience from scheduling, to estimation, to installation! Corey got here right on time, and was already cutting drywall and getting to work within 10 minutes! Not only that, he seems very passionate and knowledgeable about his work- taking time to teach us new homeowners some things we didn’t know about our house. We will definitely use them again and recommend them to anyone! Our project even came in under estimate! Thanks PSE!”
Frequently Asked Questions
Do I need a permit for a standby generator in Wellington?
Yes. Generator and gas-line work sits in the Town’s own permit category, with a gas-line inspection form and a gas line or one-line drawing as part of the submission.
How much does a whole-home generator cost in Wellington?
Generac’s published guidance is $8,000 to $16,000 installed, covering the unit, the system equipment and the installation. Size, switch type, fuel and site work affect the price, and an individual quote may fall outside that range.
Who supplies gas and electricity in Wellington?
Black Hills Energy supplies natural gas. Electricity is Poudre Valley REA or Xcel Energy depending on the address, which is worth confirming before assuming anything about the meter.
Do you install generators on natural gas and propane?
Yes. Gas is the default where the address is on the main; propane is the alternative where the gas service cannot carry the load or the property sits beyond it.
How long does the installation take?
Site preparation, the gas line and permitting drive the timeline, which is why we quote a window rather than a date. The permitting path runs through both the Town and SAFEbuilt.
Do you service brands other than Generac?
Yes — all generator brands, including maintenance and repair on units we did not install.